Yahooooo..... AEM v2 came in.... along with the 3.5 bar map sensor and IAT sensor.... Just waiting on the jumper harness now.... :)
Tuesday, May 18, 2010
Tuesday, April 20, 2010
i work, work....
cleaned up the harness.... GE motors run the harness above the runners and looks ugly.... so i took apart the plastic harness enclosure and rerouted everything below the runners.... looks a ton cleaner.... added some cool adel clamps so i can route my -3 line from the union bolt around the rear to the turbo side.... should look clean :)
underneath the manifold...
rear of the block with the adel clamps added...
top side of cold side.... clean aint it ?
front all assembled and timed.... hopefully correct....
underneath the manifold...
rear of the block with the adel clamps added...
top side of cold side.... clean aint it ?
front all assembled and timed.... hopefully correct....
Saturday, April 10, 2010
fuel system is in....
Friday, April 9, 2010
fuel system....
Wednesday, April 7, 2010
axles and brakes lines are in....
got my brake lines in....also got my axles rebuilt and in as well....
z32 TT ends with custom axles....
stainless braided lines on all four....
new hard line in....
took apart the GE.... :p
took apart all the externals....
cam, caps, buckets and cams are out...
engine is uber dirty.... but bores look clean... i think a head gasket and wire brush should tidy things up....
bottom oil pan removed so i can tap a return for the turbo....
z32 TT ends with custom axles....
stainless braided lines on all four....
new hard line in....
took apart the GE.... :p
took apart all the externals....
cam, caps, buckets and cams are out...
engine is uber dirty.... but bores look clean... i think a head gasket and wire brush should tidy things up....
bottom oil pan removed so i can tap a return for the turbo....
Monday, April 5, 2010
j's racing Ti.....
Saturday, April 3, 2010
manifold bored out to accept injectors
got a local machine shop to bore the original injector holes on my manifold... and bore and a slight taper.... my brake line kit also came in....
got my nos motorsports brake line kit....
bosch saturated 1000cc injectors with 11mm converter caps....
a recent thread came out on SF and someone made 1041whp on this manifold.... so more than works for me :p
got my nos motorsports brake line kit....
bosch saturated 1000cc injectors with 11mm converter caps....
a recent thread came out on SF and someone made 1041whp on this manifold.... so more than works for me :p
Friday, April 2, 2010
injector pig tails....
Subscribe to:
Posts (Atom)